amXea E30 robot vacuum cleaner combines an excellent suction power with smart navigation mode and with its small dimensions for efficient cleaning, regardless the floor type.
This robot is specially designed to ease your work and save valuable time, being an ideal help for cleaning hard floors and carpets with short thread in your home.
Gyro mapping - Map navigation
The gyroscopic navigation system along with the virtual map function, scans the room and generates a precise map of the cleaning surface, which will allow the robot to perform an efficient and satisfying cleaning even in hard-to-reach places.
|
![robot amxea e30 gyroscopic navigation](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
![robot amxea e30 smart memory](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
Smart memory
Using smart memory function, amXea E30 robot vacuum cleaner navigates through the entire house, determines the proper cleaning path and identifies the areas it has already been cleaned, knowing permanently where it has to go next.
Surface coverage rate is more than 98% and the repetition rate is about 1% (results obtained in an optimal cleaning space).
The robot vacuum cleaner cleans more effectively and has greater coverage and better results in spaces with fewer obstacles.
|
One robot, two ways of cleaning! Wet and dry.
amXea E30 robot vacuum cleaner has been designed as a multifunctional robot which sweeps, vacuum and wipes the floor!
.
![robot amxea dry cleaning](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=)
![robot amxea wet cleaning](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=)
It is equipped with a large dust container, with a capacity of 600 ml, which maintains more dust and dirt and significantly reduces the discharge frequency.
|
![robot amxea e30 dust container](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
![robot amxea e30 water tank](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
The 350 ml water tank helps to get the floors as clean and polished as possible, the mop function mode being available only when the dust container is replaced with the water tank.
The microfiber cloth is washable and reusable and the two tanks are very easy to clean and install on the robot.
|
Electronic water tank
The water tank controls the flow and maintains a constant and uniform flow of water. This improves the efficiency of wet cleaning and the water stains left on the floor are avoided.
The suction power of the robot vacuum cleaner can be set to one of the 3 stages - Low, Medium, High - which in wet cleaning mode controls the water flow. This setting is only available in the application installed on the mobile phone (cannot be set from the remote control).
It is recommended that in the case of wooden or parquet floors, the water flow should be set to Low or Medium, so as not to leave too much water on the floor.
|
![robot amxea e30 water flow](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
3-step cleaning system
The advanced 3-step cleaning system uses two side brushes, a multi-surface central brush and a high suction power for a quick and thorough cleaning.
-The lateral brushes are designed to collect and direct the dust with circular movements, from hard-to-reach areas, such as the corners of the room or along the walls, to the center of the vacuum cleaner.
-The central brush, made of hair and rubber, with a V-type design that prevents the hair from twisting, increase the suction capacity, from dust to large particles of dirt.
-The suction power of up to 1800PA ensures an efficient cleaning, regardless of the floor type.
![robot amxea 3-step cleaning system](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=)
Multiple cleaning modes - Auto, Edge, Spot, Single Room, Max Mode
The 5 cleaning modes available suit your requirements and needs, regardless of space or floor type.
In AUTO cleaning mode the robot vacuum cleaner will plan and use a systematic way to clean the room, through straight movements, following a forward-backward pattern. It is the standard mode, the most commonly used for daily cleaning.
SINGLE ROOM mode is used for cleaning a single rooms in the house.
SPOT cleaning mode involves the intense cleaning of a specific area, with small diameter, around a selected starting point, following a spiral pattern.
EDGE cleaning mode is suitable for cleaning more difficult to reach areas. The robot will clean the edges of the fixed objects, such as cabinets or other furniture in the house, the corners of the room and along the walls.
MAX MODE is used for deeper surface cleaning, so the robot increases the suction power. When QUIET CLEANING MODE is selected, the robot will perform the cleaning program with reduced noise.
amXea E30 robot vacuum cleaner can be programmed for home cleaning using the pre-set-hour function. So you can set the robot to start the cleaning program, at a specific time, depending on your preference, keeping the floor clean, even when there is no one at home.
![robot amxea cleaning modes](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=)
Cleaning for all floor types
amXea E30 robot vacuum cleaner can easily clean all types of floor, be it wood, marble, tiles, parquet, linoleum or carpets (with short thread).
The vacuum function can be used for floors covered with parquet, tiles, linoleum, as well as for carpets. Instead, wet cleaning is used only for hard surfaces (not for rugs or carpets).
![robot amxea multiple surfaces](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=)
Climb up to 1.5 cm
The two large soft, self-adjustable rubber wheels with anti-skid properties protect the floor, easily pass from the hard floors to carpets and increase the robot ability to cross small obstacles from the house and thresholds with a height of less than 15 mm.
|
![robot amxea e30 rubber wheels](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
![robot amxea e30 senzori anti-cadere](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
Anti-drop sensors
Anti-drop sensors prevent the robot from falling on stairs or off the edges and automatically changing its direction when lower surfaces are detected.
They prevent the robot vacuum cleaner from working and cleaning dark colored surfaces or carpets with dark patterns.
|
Anti-collision sensors
amXea E30 robot vacuum cleaner is equipped with a complete set of 360° sensors, plus a soft front bumper, which protects from scratches both the robot and furniture, walls or other household objects throughout the cleaning process.
Obstacles are identified using anti-collision sensors. The robot slows down and gently touches the walls, chair legs or other furniture pieces.
|
![robot amxea e30 anti-collision sensors](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
![robot amxea e30 slim design](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
Slim design - 7.4 cm
With a height of only 7.4 cm, amXea E30 robot vacuum cleaner can easily reach those difficult to clean and hard-to-reach places and can clean up dirt and dust from under the sofa or bed, desk, cabinets or other furniture items.
|
HEPA filter
The air filtration system is designed to capture dirt particles during the cleaning process, helping to maintain a healthy environment.
The HEPA filter is ideal for removing allergens, dust and tiny particles.
|
![robot amxea e30 hepa filter](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
![robot amxea e30 brushless motor](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
Brushless motor
The high performance brushless motor significantly extends the life of the robot vacuum cleaner, reduces noise and energy consumption.
|
1800PA Adjustable suction power
NIDEC Brushless Motor provides a high suction power, of 1800PA, to easily and quickly clean dirt, dirt, dust and other particles on different types of surfaces, wood, parquet, tiled or short-haired carpets.
To function as efficiently as possible and to ensure a deeper cleaning, the suction power can be set differently depending on the floor type.
|
![robot amxea e30 suction power](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
![robot amxea e30 lithium battery](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
2500mAh Lithium battery
The high-capacity rechargeable 2500mAh Li-ion battery, allows the robot to vacuum and clean without interruption for approximatix 90-100 minutes, covering 100-200 m² of surface, with a single charge.
|
Automatic charging
With the help of optical sensors, amXea E30 robot vacuum cleaner automatically searches for and returns to the charging station after the cleaning program is completed or when the battery level is too low, being always charged and ready for cleaning.
The small dimensions of the charging station make the robot easy to transport and place wherever it is needed.
|
![robot amxea e30 automatic charging](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
![robot amxea e30 wifi app](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
Wi-fi APP and Voice guidance
Wi-Fi connectivity allows you to control or monitor the amXea E30 robot vacuum cleaner, remotely, via mobile or tablet Smart Life application, available for Android and iOS. Using the application, you can change the cleaning modes or suction power, you can set the time when the robot starts the cleaning program or you can view, in real time, the room map and the stage of the cleaning process.
At the same time, it can also be controlled through devices with voice command, such as Alexa or Google Home, synchronizing the Smart Life application with Alexa or Google Home App.
|
LCD Display remote control
When you do not have access to the Internet or smartphone, using the remote control you can control the robot from a smaller distance, you can switch the vacuum cleaner on or off, change the cleaning mode, control the route or set the cleaning time.
|
![robot amxea e30 remote control](data:image/gif;base64,R0lGODlhAQABAAD/ACwAAAAAAQABAAACADs=) |
Regularly used, the robot vacuum cleaner help maintain and keep floors clean for a longer period of time. However, the robot vacuum cleaner does not fully replace a classic vacuum cleaner!
Although it has strong suction power, the robot is not designed to thoroughly clean carpets. So it does not have the same yield and results on carpets as on hard surfaces, such as parquet, linoleum or tile.
For detailed instructions, please read the instruction manual carefully before using the device.